two screw sunflower seed oil extruder in nepal
- Usage: forSunflower kernel oil production
- Type: Oil Pressing Machine
Production Capacity: 45 sets per year - Voltage: 380V/440V
Power(W): 30KW - Dimension(L*W*H): 1200*2800*1200mm
- Weight: 500TON
Certification: CE/ISO9001/BV - usage: for Sunflower kernel oil production
oil clolor: yellow - advantage: save energy
- bleaching earth consumption: 5-50kg/t oil
decolor function: remove the bad color - deodor function: remove the bad smell
- Name: Sunflower kernel oil production
Capacity: according customer request for Sunflower oil - Raw material: Sunflower kernel oil production
However, the crude oil has to be refined as it contains many impurities and approximately 600 ppm phosphorus. A new process, in which sunflower seeds are pressed in a twin-screw extruder, is.
The screw configuration and the operating conditions had an important influence on the oil extraction yield, the energy input and the quality of oil extracted during the extrusion of sunflower seeds. Higher oil extraction yield and specific mechanical energy were reached as the reversed screw elements were moved with increased spacing between.
Twin-screw extruder for oil processing of sunflower seeds
- Usage: Sunflower Oil, Cooking Oil
- Type: Cooking Oil Press Machine
- Production Capacity: 140-280kg/h
- Voltage: 380V
- Dimension(L*W*H): 1800*1300*1680mm
- Weight: 220 KG
- Core Components: as picture show
- Oil type: Sunflower Oil
- Item: oil press machine
- Product name: Screw oil press machine
- Raw material: Sunflower
- oil yield: based on different raw material
- Squeezing range: all oil-bearing crops
- Advantage: Energy Saving Low Residual
- Application: Edible Oil Production
- Matching machines: oil filter,air compressor and Fried feeder
- Operation: Automatic Operate
A new application of twin-screw extruder as a machine to conduct a thermo-mechanical pressing and a solvent extraction of sunflower oil in a single step and in a continuous mode was studied. Experiments were conducted using a CLEXTRAL BC 45 co-rotating twin-screw extruder and whole sunflower seeds with fatty acid methyl esters as a solvent.
The oil extraction yields were calculated according to the following formulas: R S = Q F T L L L Q S × 100, where R S is the oil yield in proportion to the seed weight (%), Q S the inlet flow rate of the whole sunflower seeds (kg/h), Q F the flow rate of the filtrate (kg/h), T L the mass of the hydrophobic phase (light phase) in the filtrate.
Extraction of sunflower oil by twin screw extruder: Screw
- Usage: Sunflower oil extraction machines
- Type: Sunflower oil extraction machines
- Production Capacity: 1-500T/D
- Model Number: NS30
- Voltage: 380V-415V
- Power(W): depend on the mode of the Sunflower Oil Machine
- Dimension(L*W*H): depend on the mode of the Sunflower Oil Machine
- Weight: depend on the mode of the Sunflower Oil Machine
- Certification: CE, BV,ISO9001
- item: the petroleum extract of Sunflower oil
- production process: pretreatment,extraction,refining
- Raw material: Sunflower Seed
- Waste Bleaching Earth Oil Content: 25% to 35 %
- Electric Consumption: 28Kwh/T Oil
- Soften Water: 150Kg/T Oil
- Phosphoric Acid: 2~3 kg/T Oil
- Bleaching Earth Consumption: 80-500KG/T Oil
- Supplier Type: the petroleum extract of Sunflower oil
- Steel material: Stainless Or carbon steel
The objective of this study was to investigate the screw configuration allowing oil extraction from sunflower seeds with a twin-screw extruder. Experiments were conducted using a co-rotating twin.
Also, a co-rotating twin-screw extruder was used for thermo-mechanical pressing and solvent extraction using fatty acid methyl esters, of sunflower oil, and it was shown that screw rotation speed.
Twin-screw extruder for oil processing of sunflower seeds
- Usage: pretreatment,extraction,refining, Edible Oil Solvent Extraction Machine
- Type: Cooking Oil Press Machine
- Production Capacity: according the capacity
- Voltage: 380V or 440 V
- Dimension(L*W*H): according the capacity
- Weight: 500 KG
- Core Components: Motor, Pressure vessel, Pump, PLC, Gear, Bearing, Engine, Gearbox
- Oil type: Sunflower oil
- Solvent: : N-hexane
- Residual Oil in Cake: 1%
- Extractor Type: Rotocel Extractor
- capacity: 20-500TPD Rice Oil Solvent Extraction Equipment
- Equipment Material: Stainless Steel or Carbon Steel
- Raw Material: Sunflower Oil Cake,Sunflower Seed,etc
- Extractor System: Toasting System
- Use: : Sunflower Oil Solvent Extraction
- Color: Stainless Steel Color
DOI: 10.1016/J.INDCROP.2010.05.005 Corpus ID: 98652016; Twin-screw extruder for oil processing of sunflower seeds: Thermo-mechanical pressing and solvent extraction in a single step
A new process, in which sunflower seeds are pressed in a twin-screw extruder, is examined here. The screw profile was first optimized. Oleic sunflower seeds were crushed and 80% of the oil was removed. The resultant oil was of good quality, with acid numbers below 2 mg KOH/g of oil and total phosphorus contents of about 100 ppm. The influence.
[PDF] A twin-screw extruder for oil extraction: I. Direct
- Usage: manual oil press
- Type: manual oil press
- Production Capacity: according to the capacity
- Model Number: LD cold pressed Sunflower oil machine
- Voltage: 220v,380v,440v
- Power(W): according to the capacity
- Dimension(L*W*H): 1610x615x1260mm
- Weight: 1050 KG
- Certification: CE,BV,ISO
- name: manual oil press
- raw materials: fresh Sunflower
- end product: virgin Sunflower oil, Sunflower meal
- texture: stainless steel,carbon steel
- package: wooden case special for cold pressed Sunflower oil machine
- other materials: Sunflower ,Sunflower ,sunflower kernel, Sunflower
- using condition: no extra requirement
- popular area: Srillanka, Malaysia,Phillipine,Nigeria,America tropical area
- main business: South East Asia,Middle America,West Africa
- using life: more than 15 years
Lipids are traditionally removed from seeds by mechanical crushing and solvent extraction. During the mechanical crushing process the oilseed is cleaned, cracked, flaked, and cooked before entering a mechanical screw press. Seventy-five percent of the oil of sunflower seeds can be extracted by crushing, and the fatty cake then contains about 15% of oil. The oil levels remaining in the cake can.
Our work is about the extraction of sunflower seed oil in a twin-screw extruder with or without the injection of 2-ethylhexanol and acidified 2-ethylhexanol. 2-Ethylhexanol is mixed with phosphoric acid. The oil recovery is increased to 90% by the co-injection of acidified alcohol. Mixing phosphoric acid with the alcohol enhances the lability of the oily spherosomes. Its addition increases the.
- What is a sunflower oil extraction plant?
- This sunflower oil extraction plant contains sunflower seeds pretreatment machines and sunflower oil pressing machines, which can efficiently extract sunflower oil from sunflower seeds.
- How to extract oil from sunflower seeds?
- Oil sunflower seeds can be squeezed from oil, and oil residue (also known as "oil sunflower cake") can be used as protein feed. Sunflower trays and straws can also be used accordingly. Therefore, the sunflower seed oil press is widely used. The oil extraction process of sunflower seeds is heat treatment.
- How is sunflower seed oil produced?
- Sunflower seed oil production does the following manufacturing processes: cleaning of the seeds, grinding of the seeds, pressing and extraction of crude oil from these seeds and then further refining the oil obtained before packaging. A volatile hydrocarbon like hexane is used as a solvent to extract the oil.
- What is sunflower seed oil press?
- Therefore, the sunflower seed oil press is widely used. The oil extraction process of sunflower seeds is heat treatment. Heat treatment is one of the more important processes in the process of extracting oil. The material that is pressed after heat treatment is called hot pressing, and the material without heat treatment is called cold pressing.
- Voltage: 380V/440V
